0

Introduction #

Using new nimbleDataProPlus2 (NDPP2) in AmiBroker is now easier than before. You can start running NDPP2 in 2 minutes as explained below.

  1. Download and Install NimbleDataProPlus2

Install NimbleDataProPlus2 normally on your desktop. During installation, you can choose AmiBroker Edition (32 bit / 64 bit)

 

  1. Register NimbleDataProPlus2

Create new database in AmiBroker using “Global data Feeds RT Data Plug-In”as data source. First time users will be asked to register their copy. Once users activates their copy by clicking on the activation link received over email, they can start using the product immediately. Free Trial is automatically activated to first time users.

 

  1. Start Using NimbleDataProPlus2

Add symbols and start using NimbleDataProPlus2 right away.

In next articles, you will find detailed information with step-by-step guide for each of the steps above.

Yes No Suggest edit
Last updated on July 17, 2017
0 of 0 users found this section helpful

Installation #

Download and run installer. Installation is straight forward, as shown below.

It is important to click on ‘Finish’ button to finish the installation process.

Yes No Suggest edit
Last updated on July 17, 2017
0 of 0 users found this section helpful

Supported Platforms #

AmiBroker 32 / 64 Bit setup #

  1. After installation, you will need to create AmiBroker Database. This is a one-time process. Click on File>>New>>Database in AmiBroker menu as shown below.

Enter new database name and click on ‘Create’ Button.

From the ‘Data Source’ drop-down box, select ‘Global Data Feeds RT data Plug-in’.

If you do not see Global Data Feeds Plugin under ‘Data Source’, please check following :

  1. Check AmiBroker Path: Please check if you have installed NimbleDataProPlus2 for the same AmiBroker which is started now. To verify, navigate to \Plugins directory of the AmiBroker which should contain ‘GDF.Nimble2.Ab.Plugin.dll’ file. If required, re-install NimbleDataProPlus2 by selecting appropriate AmiBroker path during installation.

Check AmiBroker Edition: Please check if you have selected correct AmiBroker Edition (32 bit or 64 bit) at the time of installation. 32bit NimbleDataProPlus2 will not be visible under 64bit AmiBroker. Similarly, 64bit NimbleDataProPlus2 will not be visible under 32bit AmiBroker. You can know the exact AmiBroker Version from AmiBroker menu Help >> About as shown below.

If required, re-install NimbleDataProPlus2 by selecting appropriate AmiBroker path during installation.
Enter 150000 for ‘Number of bars’ and ‘Tick’ or ‘1 Minute’ as the Base time Interval as shown below and click on ‘Intraday Settings’ button.

  1. Choosing ‘Tick’ as Base Time Interval: If you want to see range bars or timeframes smaller than 1 minute, you should choose ‘Tick’ as Base Time Interval.

Choosing ‘1 Minute’ as Base Time Interval: If you do not want to see timeframes smaller than 1 minute, you can choose ‘1 Minute’ as Base Time Interval.

Notes:

a. Irrespective of whether you choose ‘Tick’ or ‘1 Minute’, the data will be updating tick by tick (1 second).

b. Irrespective of whether you choose ‘Tick’ or ‘1 Minute’, the data is delivered realtime without any delay.

c. Since each minute can contain 60 ticks, it may take little more time to backfill symbols with ‘Tick’ as base time interval. For same reason, bandwidth consumption is higher with ‘Tick’ as base time interval.

Under ‘Intraday Settings’, make settings as shown below, click OK.

Ensure Database Settings as shown in the main screen below and click OK.

On clicking OK, you will get the login desk as below:

Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

If registration is successful, it shows message as below.

Check your email, click on “Activate Free Trial “button to activate your free trial. Once done, click on NEXT button as shown below:

Once license is activated, it will show message with expiry date of subscription as shown below:

Once you get above window then click on Ok and after that click on Login button on dashboard.

To view the chart after Login to the desk user must need to add the symbol as per given format in AmiBroker.

After clicking on the symbol name from symbol list you can able to view the symbol name in dashboard as follow.

Yes No Suggest edit
Last updated on September 6, 2017
0 of 0 users found this section helpful

MetaStock #

This nimbleDataProPlus version is intended to interact with Equis MetaStock Professional 7.2, 8.x, 9.x, 10x and 11x for DBC Signal. To setup MetaStock Professional properly, follow steps as given below:

  1. If you’re going to use nimbledataProPlus2 instead resembling product (such as MetaServer RT, Dynaloader etc.) or if you have eSignal installed, uninstall all such application before installing nimbleDataProPlus and MetaStock Professional.

 

  1. Install MetaStock Professional first. Then install 

 

  1. Make sure your MetaStock software is installed for eSignal real-time vendor during installation – as shown below.

MetaStock Professional Setup

  1. After installation, run Equis Real-Time Configurationitem from Equis International program group.
    Click on Data Options Tab and ensure that Replace vendor-supplied time with computer system time and Adjust data record time (hours) checkboxes are unchecked – as shown below.

  1. Click on File UpdatesTab of Equis Real-Time Configuration Here you have to delete all listed folders and make it blank.

6.  After installation, you will need to start the MetaStock. It will pop up the Login desk as below:

7. Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

8. If registration is successful, it shows message as below.

9. Check your email, click on “Activate Free Trial “button to activate your free trial. Once done, click on NEXT button as shown below:

10. Once license is activated, it will show message with expiry date of subscription as shown below:

11. Once you get above window then click on Ok and after that click on Login button on dashboard.

12. Start MetaStock and select File>>New Chart as shown below:

13. To get EOD (daily) history, we need to set option “Prompt for dates when chart is opened” from Options as shown below:

14. After click on Load Option, we get below small window & need to select 2nd option “Prompt for dates when chart is opened” as shown & click on OK.

14.

  1. Select eSignal folder on left and choose ‘New Symbol’from Tools. Then choose existing symbol / create new symbol (as shown below), select periodicity and click Open. 

Important : If you don’t see eSignal folder on left bottom as shown in this image then it means that you have not installed MetaStock with ‘eSignal’ as your data vendor. You will need to install MetaStock again and this time during installation, choose ‘eSignal’ as your data vendor – as shown in screenshot above.

15. Enter the symbol name and Start / End time and click OK.

16. After clicking on “Ok”, you can able to view the symbol name in window as below:

17. Now onwards whenever you add any new symbol using above steps you will get one new window like this:

Here you need to select First Date as 01/01/2010 &  Last Date will set automatically as per current date so that you will get EOD (daily) data from 01/01/2010 for F&O segment.

18. After click on OK button, it will then load the chart of the symbol as shown below. 

1 Minute Chart:

Tick Chart:

Yes No Suggest edit
Last updated on September 6, 2017
0 of 0 users found this section helpful

How to use Dictionary #

To add the symbol name for more than 14 characters you can use the “Dictionary” function. You can use this function as follow, after clicking on Dictionary button you will get the following window:

Ensure that the symbol name you have entered is in CAPITAL letters only.

After entering the symbol name you can view it in Dictionary like below:

You can now request the symbol in your charting platform as NIFTY and from server it will fetch the data for NIFTY17JUN7800CE.NFO.

You can add the new symbol in Dictionary during Live session also. Whenever you add the symbol name in dictionary you need to request the data from server with the same name for all charting platform to get the data of desired underlying from our server.

Viewing Charts

To view chart of any symbol, you will first need to add symbols to MetaStock.

Symbol addition in MetaStock :

To manually add symbol in MetaStock (through File>> New >> Chart >>Tools>> New symbol), you must know the symbol naming conventions for each exchange. The same is explained below.

Symbol Naming Conventions:

 

Notes:

  • When adding manually, enter all symbols in UPPERCASE.
  • If any symbol shows ERR in dashboard, it means either that symbol is expired or spelled incorrectly.
Yes No Suggest edit
Last updated on September 6, 2017
0 of 0 users found this section helpful

Advanced GET #

If you’re going to use nimbledataProPlus2 instead resembling product (such as MetaServer RT, Dynaloader etc.) or if you have eSignal installed, uninstall all such application before installing nimbleDataProPlus2 and Advanced GET.

Install Advanced GET first. Then install nimbleDataProPlus2

  1. After installation, you will need to start the Advanced GET. It will pop up the Login desk as below:

2. Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

3. If registration is successful, it shows message as below.

4. Check your email, click on “Activate Free Trial “button to activate your free trial. Once done, click on NEXT button as shown below:

5. Once license is activated, it will show message with expiry date of subscription as shown below:

6. Once you get above window then click on Ok and after that click on Login button on dashboard.

7. Start Advanced Get. Select File>>New Chart as shown below.

8. Type the name of the Symbol, its period and number of bars and click on ‘Load’, as shown below

It will then load the chart for the requested symbol as shown below.

Yes No Suggest edit
Last updated on September 6, 2017
0 of 0 users found this section helpful

NinjaTrader 7 #

  1. After installation, you will need to create a new connection, this is one time process. Go to Menu >> Tools >> Account connection

2. Once connection is created. Go to Menu >> File >> Connect >> Connection name “GFDL”.

3. After connection Login desk will appear, thrn click on Login. Reistration window will pop-up. This is one time process. Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

4. Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

If registration is successful, it shows message as below.

5. Check your email, click on “Activate Free Trial “button to activate your free trial. Once done, click on NEXT button as shown below:

6. Once license is activated, it will show message with expiry date of subscription as shown below:

7. Once you get above window then click on Ok and after that click on Login button on dashboard.

8.  To view the chart after Login to the desk .First, you will need to create new symbol group for our data product. Go to menu Tools >> Instrument Manager and click on New button. You can give any name e.g. GDF. Please refer below screenshot:

9. In next window, enter ANY symbol name under Master Instrument e.g. BANKNIFTY or BANKNIFTY1 etc. Select currency as ‘IndianRupees’ Then select session template and Exchange as Nse as per below screenshot:

10. In next tab of same window i.e. Misc, you will need to enter the exact symbol name  i.e. BANKNIFTY-I.NFO under ESignal and click on Ok button as per below screenshot:

11. Once symbol is added, select it and add it under newly created instrument i.e. GDF – as shown below

12. Now to open a chart, go to menu File>>New Chart and open the symbols as per below screenshot

1 Minute chart:

Tick chart :

 

Yes No Suggest edit
Last updated on September 6, 2017
0 of 0 users found this section helpful

MultiCharts #

  1. After installation of NimbleDataProPlus 2/ NimbleDataPlusLite 2 for MultiCharts, start MultiCharts first, you will need to add required symbols from menu File >> New QuoteManager Window:

2. In QuoteManager window, goto menu Instruments >> Add symbols >> Manually

3. Select Data source and enter symbol name (e.g. NIFTY-I.NFO) as shown below.

Click on Ok button and set the chart symbol properties as per below screenshots:

4. Once done, goto menu File >> New >> Chart Window in MultiCharts

5. Goto second tab “Settings” and select 24 hours under Session as per below screenshot:

6. By default, we provide last 60 calendar days intraday backfill in 1 minute and hence recommend you to enter 60 with “Days Back” under Data Range as per below screenshot:

On clicking OK, you will get the login desk as below.

 

7. Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

9. If registration is successful, it shows message as below.

10. Check your email, click on “Activate Free Trial “button to activate your free trial. Once done, click on NEXT button as shown below:

11. Once license is activated, it will show message with expiry date of subscription as shown below:

12. Once you get above window then click on Ok and after that click on Login button on dashboard.

13. After login, you can view the chart in MultiCharts as below:

 

Yes No Suggest edit
Last updated on September 6, 2017
0 of 0 users found this section helpful

Ensign 10 #

  1. After installation, start Ensign 10 and select Setup>>Feeds>>Data Feeds and select eSignal – as shown below.

This this dialogue box is closed, a login dialogue box for our datafeed will appear – as shown below. Enter your user id / password and login to our servers.

Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

If registration is successful, it shows message as below.

Check your email, click on “Activate Free Trial “button to activate your free trial. Once done, click on NEXT button as shown below:

Once license is activated, it will show message with expiry date of subscription as shown below:

Once you get above window then click on Ok and after that click on Login button on dashboard.

Go to Main>>Charts and make the selections as shown in the window below and click on Open button.

Once chart is opened, you can set timing setting as per below screenshot. For this, right click on chart & select Properties.

Also you need to set timezone as per GMT + 5:30 to view chart in Indian time. For this, select Setup >> Chart and goto Properties as per below screenshot.

Renko Chart:

 

Yes No Suggest edit
Last updated on September 6, 2017
0 of 0 users found this section helpful

NeuroShell Trader #

Once you install NimbleDataProPlus / NimbleDataPlusLite for NeuroShell Trader, we have to configure data source in NeuroShell Trader. For this, goto menu Tools >> Data Sources as shown below:

After that, it will popup Data Source window. Select “Server” tab as shown below :

For Data Server, we have to select plugin “GDF.Nimble2.NST.Plugin” as per below screenshot :

Click on Setup button and select TimeZone as Local Time as shown below :

Once you will select “GDF.Nimble2.NST.Plugin” as a Data Source, it will show you two files and we have to select both the files as per below screenshot :

Now to open new chart, goto menu File >> New as shown below :

It will popup chart template as below. Select required template and click on Next button.

Select required periodicity and start date as shown below :

In next window, select required Financial Instrument and click on Next button.

If you will select instrument as “Futures”, it will show you some already added symbols as shown below.

Select the required symbol and click on Finished button.

If you want to add new fresh symbol, click on “Add New Ticker Symbol” and add new symbol as shown below :

Enter Ticker & Name as symbol name. Select required any category and click on OK button.

Select the symbol from list and click on Finished button, you will get the login desk as below :

Enter your details and click on ‘REGISTER’ button. All fields are mandatory. It is important that you write correct email id and mobile number because activation link is sent over email / mobile.

If registration is successful, it shows message as below.

Check your email, click on “Activate Free Trial “button to activate your free trial. Once done, click on NEXT button as shown below:

Once license is activated, it will show message with expiry date of subscription as shown below:

Once you get above window then click on Ok and after that click on Login button on dashboard.

Yes No Suggest edit
Last updated on April 12, 2018
0 of 0 users found this section helpful

Dashboard Overview #

“Delete” function: You can stop the realtime update of any unwanted scrip by using this button. If you will delete the scrip then the realtime update in front of the scrip which is indicated by “Y” will get stopped.

After clicking on “ Account Info “ you will get the information about regarding the license like Name, Email ID, Phone number, Expiry date, License Key, Activation status and The server to which you are connected.

Dictionary:

To add the symbol name for more than 14 characters you can use the “Dictionary” function. You can use this function as follow, after clicking on Dictionary button you will get the following window:

Ensure that the symbol name you have entered is in CAPITAL letters only.

After entering the symbol name you can view it in Dictionary like below:

You can now request the symbol in your charting platform as NIFTY and from server it will fetch the data for NIFTY17JUN7800CE.NFO.

You can add the new symbol in Dictionary during Live session also. Whenever you add the symbol name in dictionary you need to request the data from server with the same name for all charting platform to get the data of desired underlying from our server.

Yes No Suggest edit
Last updated on July 17, 2017
0 of 0 users found this section helpful

Viewing Charts #

To view chart of any symbol, you will first need to add symbols to AmiBroker.

Symbol addition in AmiBroker :

To manually add symbol in AmiBroker (through Symbol>>New Menu or through Symbols Toolbar), you must know the symbol naming conventions for each exchange. The same is explained below.

Symbol Naming Conventions:

Notes:

  • When adding manually, enter all symbols in UPPERCASE.
  • If any symbol shows ERR in dashboard, it means either that symbol is expired or spelled incorrectly.

Once the symbol are added in AmiBroker, click on any symbol name to view its chart

 

Yes No Suggest edit
Last updated on July 17, 2017
0 of 0 users found this section helpful
Suggest Edit